 |
 |
|
| Live Center: The live center is for checking the straightness of a drive line and for heat straightening a drive line. It should not be used for pressing or balancing. |
 |
||||
|
|
|||||
| Driveshaft Cooler: Save time by cooling your drive-shafts after welding and heat straightening. Westport recommends using synthetic machine tool coolant for the cooling fluid. |
 |
||||
|
|
|||||
SPL Fixtures:
|
 |
||||
|
|
|||||
| Automatic Weld Unit: The autoweld unit bolts directly to the Shaftmaker, next to the headstock of the machine. Using a simple belt drive, it turns the headstock spindle from 0-6 RPM for professional looking welds. May fit other Driveline machines as well. $800.00 each |
 |
||||
|
|
|||||
| Center Bearing Support: Used for balancing a two or three piece drive line. The mounting plate moves on bearings – this provides for a third balancing point. |
 |
||||
|
|
|||||
| Transmission Slip Chuck: This six jaw chuck will grab a minimum diameter of .670 and a maximum diameter of 6.300. The kit comes with a mounting plate, chuck wrench, adjusting wrench and mounting bolts. |
 |
||||
|
|
|||||
|
|||||
|
Home | Shaftmaker G3 | Shaftmaker | Pop It | Optional Equipment | Fixturing | Socket Chuck Yoke & Flange Fixtures Training Videos | Tips, Tricks, Info | Request Info | Financing | Links |
|||||
| 1-800-237-1444 ~ 916-371-4493 E-Mail: westportproducts@att.net Westport Machine Works, Inc. 700 Houston Street • West Sacramento, California 95691 |
|||||
| CANADIAN SALES: BUY-RITE INDUSTRIES Contact: Patrick Hunt • pat@buyriteindustries.com Phone: (780) 975-1707 Edmonton, Alberta. |
|||||
